RT-2000

Net Weight: 20 kg

RT-2000 is an organic, solvent-free interior wall coating.
It is non-toxic, cures rapidly, and produces no irritating odor during application.

The coating provides excellent waterproof performance and can be used as an alternative to interior wall adhesive systems.
RT-2000 offers outstanding flame resistance, resistance to high and low temperatures, UV resistance, resistance to mold and mildew, oil resistance, and water resistance.
It is easy to clean and provides excellent adhesion and compatibility with substrates.

1. Electronics & Electrical Appliances: Sealing of electronic components and equipment housings

2. Automotive Industry: Sealing of engines, transmissions, and vehicle components

3. Construction & Civil Engineering: Sealing of building joints, structural gaps, and curtain walls

4. Medical Equipment: Sealing of medical devices and equipment enclosures

5. Aerospace: Sealing of various aerospace components

Suitable for interior wall applications in various buildings, including:

• Residential decoration

• Kindergartens

• Nursing homes

• Maternity centers

• Hospitals

• Hotels

• Large supermarkets and other high-traffic public areas

1. Substrate Preparation

Ensure the base surface is clean, dry, free of oil stains, floating dust, sanding residue, loose particles, hollows, and powdering.

• Cracks smaller than 1 mm do not require repair.

• For cracks larger than 1 mm, repair and level the surface.

• If water seepage is present, identify and treat the leakage source first.

• Local areas may be treated with a waterproof coating.
  After preparation, ensure the base surface is smooth and free of visible joints.

2. Application Method

• If dilution is required, mix coating with diluent at a ratio of 10 : 4.

• Application methods include brushing, rolling, or spraying.

• Recommended application: two coats.

• Reference consumption: 1 kg / 5–6 m² per coat; 1 kg / 4–5 m² for two coats.

• Interval between coats: 4–12 hours, depending on ambient temperature.

1. The coating surface must be free of pinholes and blistering. If defects occur, recoat the affected areas after drying.

2. Do not proceed with other construction work that may damage the coating before it is fully cured.

3. Seal and store unused coating properly to prevent premature curing.

4. In case of accidental contact with eyes, rinse immediately with clean water and seek medical attention.

The company strictly implements applicable product standards and is only responsible for product quality.
Performance may be affected by construction conditions such as climate, substrate materials, and application methods.
Before large-scale use, necessary testing should be conducted to confirm satisfactory results.