Weather resistant / Corrosion resistant / Radiation resistant
Standards: T/FSI 141-2024; T/CMEPCA 077-2025
Shelf Life: 12 months
Storage Conditions: Store at room temperature in a cool, dry place
RT-6000
Net Weight: 20 kg
Product Description
RT-6000 is a silicone-based elastic anti-corrosion coating with a simple application process and excellent adhesion to substrates.
After curing, the coating forms a Si–O–Si network structure, providing outstanding stability against oxygen, ozone, and ultraviolet radiation.
It offers excellent resistance to high and low temperatures, strong resilience, and superior elasticity and elongation.
RT-6000 effectively isolates corrosive gases and liquids in harsh environments, delivering excellent long-term anti-corrosion protection.
Application Scope
-
Chemical industry
-
Steel and metallurgical industry
-
Municipal infrastructure in coastal cities
Application Instructions
1. Substrate Preparation
The substrate surface must be clean, dry, and firm, free from peeling, floating dust, oil, grease, and loose particles.
2. Application Method
-
If dilution is required, mix coating with diluent at a ratio of 10 : 4.
-
Application methods include brushing, rolling, or spraying.
-
Typically apply two coats.
-
Reference consumption: approximately 1 kg/m² per coat.
-
Coating thickness: 0.5–1.5 mm.
-
Interval between coats: 4–12 hours, depending on ambient temperature.
3. Consumption
Recommended dosage: greater than 1 kg/m²
Precautions
-
Metal substrates must be properly treated; surfaces should be free from rust, oil, grease, and contaminants, achieving Sa2 surface preparation.
-
For steel and metal substrates, ensure the surface is completely dry and has completed curing before application.
-
Do not perform other construction activities that may damage the coating before it is fully cured.
-
Seal and store unused coating properly to prevent premature curing.
-
In case of accidental contact with eyes, rinse immediately with clean water and seek medical attention.
Disclaimer
The company strictly implements applicable product standards and is only responsible for product quality.
Performance may be affected by construction conditions such as climate, substrate materials, and application methods.
Before large-scale use, necessary testing should be conducted to ensure satisfactory results.