Flame retardant / Long-lasting durability / Strong adhesion
Standard: GB 14907-2018
Shelf Life: 12 months
Storage Conditions: Store at room temperature in a cool, dry place
RT-2001
Net Weight: 20 kg
Product Description
RT-2001 is a solvent-based exterior fire-retardant coating that cures at room temperature.
It is formulated with silicone resin as the primary film-forming material, combined with functional fillers and additives.
The coating provides excellent thermal insulation and fire-retardant performance, making it suitable for fire protection of building structures.
Application Scope
Applicable to various building structures, including:
-
Colored steel tiles
-
Steel structures
-
Wooden structures
-
Concrete structures
-
Combustible substrates
Application Instructions
-
This product is a single-component coating. Before each use, it must be thoroughly mixed with a power mixer until uniform.
-
Suitable for airless spraying or brushing. Airless spraying is recommended.
-
Spray nozzle diameter: 0.48–0.58 mm
-
Pump outlet pressure: ≥ 176 kg/cm²
-
Precautions
-
The coating surface must be free of pinholes or blistering. If such defects occur, recoat the affected areas after drying.
-
Do not carry out other construction work that may damage the coating before it is fully cured.
-
Seal and store unused coating properly to prevent premature curing.
-
In case of accidental contact with eyes, rinse immediately with clean water and seek medical attention.
Disclaimer
The company strictly implements applicable product standards and is only responsible for product quality.
Performance may be affected by construction conditions such as climate, substrate materials, and application methods.
Before large-scale use, necessary testing should be conducted to ensure satisfactory results.