RT-7000

Net Weight: 20 kg

RT-7000 MS Transparent Waterproof Coating is a new-generation moisture-curing waterproof coating based on modified silane polymer technology.
It forms a surface film rapidly under humid conditions while maintaining sufficient open time for application.

The product is environmentally friendly and free from isocyanates, organic solvents, and formaldehyde.
It offers excellent weather resistance, cures at room temperature as a single component, has low viscosity, and is easy to apply.

Suitable for home decoration and interior waterproofing applications, such as:

• Bathrooms

• Kitchens

• Balconies

• Rapid waterproof repair of floors and wall surfaces

1. Substrate Preparation

1. Inspect the substrate before application to ensure it is flat, solid, and free from looseness.

2. Clean the substrate thoroughly; ensure there is no standing water and that the surface is clean, free of particles, loose materials, oil, or other contaminants.

3. If grooves or cracks deeper than 2 mm are present, fill them with putty before coating.

2. Application

1. Measure the coating area and apply RT-7000 at a dosage of 300–500 g/m², adjusting according to actual conditions.

2. Apply the transparent waterproof coating evenly, controlling the coating thickness at approximately 0.2 mm, and avoid air bubbles during application.

3. Curing

1. After application, avoid surface contamination.

2. Under standard conditions (23 °C, 50% relative humidity), the coating can be walked on after 24 hours and reaches normal service condition after 3 days.

1. Stir the coating thoroughly before use and avoid prolonged exposure to air.

2. Due to substrate diversity, adhesion testing is recommended on special substrates before full application.

3. During application, prioritize flat surfaces first, then proceed to vertical surfaces.

4. Apply thinner coats on vertical surfaces to avoid sagging; strictly control application thickness.

5. Use rollers for large-area application and brushes for corners and detailed areas.

6. After full curing, the coating becomes elastic and durable.

7. After application, avoid sharp objects contacting the coated surface to prevent damage.

The company strictly implements applicable product standards and is only responsible for product quality.
Performance may be affected by construction conditions such as climate, substrate materials, and application methods.
Before large-scale use, necessary testing should be conducted to confirm satisfactory results.