RT-3000

Net Weight: 20 kg

RT-3000 is an organic elastic exterior wall coating.
It is solvent-free and provides excellent waterproof performance.

The product offers outstanding resistance to high and low temperatures, ultraviolet radiation, acid rain, oil, and water, as well as excellent electrical insulation properties.
With superior adhesion, good compatibility with substrates, and easy maintenance, RT-3000 is one of the preferred solutions for outdoor waterproofing and weather resistance.

1. Waterproofing of building exterior walls

2. Anti-corrosion protection for metal surfaces, such as steel structures, aluminum alloy materials, underground spaces, and colored steel roofs

1. Substrate Preparation

The base surface must be clean, dry, and firm, free from loose sand, dust, or floating particles.

2. Joint Treatment

For cracks wider than 3 mm, seal with MS sealant first, then apply the coating.

3. Application Method

• Application methods include brushing, rolling, or spraying.

• Typically apply two coats.

• Reference consumption: approximately 1 kg/m² per coat.

• Total coating thickness: 0.8–1.0 mm.

• Interval between coats: 4–12 hours, depending on weather conditions.

4. Consumption

Recommended dosage: greater than 1 kg/m²

1. When applying on cement or concrete substrates, ensure the base is completely dry and fully cured before application.

2. Do not proceed with other construction work that may damage the coating before it is fully cured.

3. Seal and store unused coating properly to prevent premature curing.

4. In case of accidental contact with eyes, rinse immediately with clean water and seek medical attention.

The company strictly implements applicable product standards and is only responsible for product quality.
Performance may be affected by construction conditions such as climate, substrate materials, and application methods.
Before large-scale use, necessary testing should be conducted to ensure satisfactory results.